30% Off on 4Cabling’s 40 meter Laser Distance Meter

Measure with accuracy, quick and easy.

4Cabling is helping you take measurements faster and easier with their 40 meter Laser Distance Meter, on sale for $69 right now! That’s 30% off!

The old days of tape measures are gone. Digital laser measurement is the fast, easy way to measure. The dTape2 is the perfect home and job site measuring tool and eliminates the need for a helper to get the job done and is much more accurate…

Lightweight Unit
An innovative product, dTape2 weighs only 75 g and is only 24 mm thick, and fits easily into your pocket!

Multiple Functions and Calculations
dTape2 integrates multiple measuring functions and intelligent calculations. You can easily measure length, area, acreage and volume by simply pressing a button. The backlit display allows you to measure at anywhere and anytime. You can easily read two lines of data even in dark environment. The measuring range of 40 m and accuracy of 2 mm meets all your measuring needs at home and at work.

Key Features
Easy length measurement
Measuring lengths and distances up to 40m is a breeze with dTape2. Just take dTape2 Laser Distance Meter out of your pocket and at the touch of a button, measure distances! The distance will be displayed on the screen.

Calculate surface area quickly
Measure surface area without using other calculators.

Pythagorean theorem measurement
Measure the heights and widths of difficult targets using Pythagorean calculation.

Data storage function
Store up to 10 historical measurements and recall at anytime for calculation purposes.

Fluke: IntelliTone Pro 200 LAN Toner and Probe Kit

The Fluke Intellitone Pro 200 Tester.

The Fluke IntelliTone™ Pro Toners and Probes offer the powerful combination of digital and analog technologies to resolve common infrastructure problems that arise during installing, maintaining, and changing of your network. Digital and analog toning in one tool.

Today’s media networks are more diverse than ever. Most buildings have a combination of telephone, twisted-pair data, coax, and security/alarm wiring. Verifying proper routing and termination of this diverse set of cabling types requires tools optimized for different frequencies, connector types, and work environments. Until now, no single tool has combined the right technologies to operate across all copper media types, and in all environments.

IntelliTone Pro changes that by combining cutting-edge digital and analog signaling to locate and verify virtually any copper cable, regardless of application or environment. When to use digital IntelliTone Pro’s digital encoded signal should primarily be used on high-grade data cabling (Cat 5e/6/6a), and in active network environments. It operates at a high-frequency to match the higher frequency data the cable plant is designed to carry. This allows the tone to overcome competing data signals and aggressive low-frequency terminations of Ethernet switches. That means LAN cabling technicians can quickly zero in on the right cable during installations or troubleshooting.

Digital toning is especially helpful once the cable has been located as it displays cable wire map and checks for shorts, opens and miswires. The IntelliTone Pro 200 probe has an RJ45 input port and CableMap feature, allowing it to be plugged directly into a patch panel or wall port. The benefit of this wire map test is two-fold:

• eliminates the need for both a toner to a wire-mapper.
• provides 100% confirmation that the right cable has been located.

The analog IntelliTone Pro’s SmartTone analog toning can be used on voice-grade cabling (Cat 3 and below), as well as coax, security/alarm, and speaker wiring. These cables are optimized for lower frequency transmissions, and therefore are more easily isolated with a low-frequency tone. It should also be used in areas with relatively low interference from electronic devices. In high-interference environments, digital may still be a better choice.

SmartTone analog toning eliminates frustrating guesswork locating individual wire pairs during installations. The SmartTone analog signal will change ‘songs’ each time the pair under test is shorted together. This provides telecom technicians a decisive way to identify individual wire pairs before punching them down on a jack or a block, or when diagnosing voice transmission problems.